DIESEL & ELECTRIC PUMPS; EPDM & HDPE HOSES
PUMPS & HOSES
DIESEL PUMPS
For pumping large volumes of water in sewer bypass, water transfer, bulk dewatering, or well-point dewatering applications.
Stormtec offers a variety of diesel pump applications to move large volumes of sewage, liquids, and sludge up to 4 inches (102 mm) in diameter. Our diesel pumps are typically mounted on a trailer, featuring a continuous self-priming system which allows the pumps to run unattended and/or dry.
Our Diesel Pumps may include the following features:
- Continuous self-priming.
- 12-volt electric start with auto-start capable control panel.
- Flex coupled to diesel engine.
- 24-hour minimum capacity fuel tank.
- Belt driven compressors fitted to operate the air-ejector priming system.
- Cast iron wet end with open impellers.
- Replaceable wear plates.
- Available accessories include spillguard, suction, discharge hoses or fuel nurse tanks.
Available Diesel Pumps, comparing different features and specs:
| Model | DT4 | DT6 | DT8 | DT12 | BA150E | BA180E | PT150 | PT200 |
|---|---|---|---|---|---|---|---|---|
| Max Flow | 1,450 GPM
(91.7L/s) | 2,800 GPM
(177.2 L/s) | 4,500 GPM
(284.8 L/s) | 6,100 GPM
(386 .1 L/s) | 2,200 USGPM | 3,168 USGPM | 396 GPM
(25 L/s) | 880 GPM
(55L/s) |
| Connections | 4″ | 6″ | 8″ | 12″ | 6″ | 8″ | 6″ | 8″ |
| Max Head | 150 ft (46m) | 150 ft (46m) | 230 ft (70m) | 200 ft (61m) | 125 ft (38m) | 135 ft (41m) | 66 ft (20m) | 99 ft (30m) |
| Solids Handling | 3″ (76mm) Diameter | 3″ (76mm) Diameter | 3.38″ (86mm) Diameter | 4″ (102mm) Diameter | 3.15″ (80mm) | 3.15″ (80mm) | N/A | N/A |
| BEP with 15′ Lift | 1,000 GPM @ 98 ft (30m) | 1,960 GPM @ 85 ft (26m) | 3,100 GPM @ 136 ft (41m) | 4,900 GPM @ 110 ft (33m) | – | – | N/A | N/A |
| Application | Sewer Bypass,
Water Transfer, Bulk Dewatering | Sewer Bypass,
Water Transfer, Bulk Dewatering | Sewer Bypass,
Water Transfer, Bulk Dewatering | Sewer Bypass,
Water Transfer, Bulk Dewatering | Sewer Bypass,
Water Transfer, Bulk Dewatering | Sewer Bypass,
Water Transfer, Bulk Dewatering | Well-Point Dewatering | Well-Point Dewatering |
| Additional Features | N/A | N/A | N/A | N/A | – | BBA Super Silent Canopy,
15L/h at BEP | BBA Super Silent Canopy,
Can Run Dry Indefinitely | BBA Super Silent Canopy,
Can Run Dry Indefinitely |
| Download Equipment Specs | Download | Download | Download | Download | Download | Download | Download | Download |
DT4
DT8
BA180E
ELECTRIC TRANSFER PUMPS
For pumping large volumes of water in sewer bypass, water transfer, bulk dewatering, or well-point dewatering applications.
Stormtec offers a variety of electric transfer pump applications to move large volumes of sewage, liquids, and sludge up to 3 inches in diameter. Our electric transfer pumps are typically mounted on a skid, which can stand-alone or be used in combination with additional equipment.
Every Electric Transfer Pump we provide includes the following features:
- Skids are constructed out of carbon steel epoxy coated with integral lifting lugs for easy transport.
- Fitted 230-volt or 460-volt control panel.
- Automatic float controls.
- Systems can stand alone or be used in combination with additional equipment.
Available Electric Transfer Pumps, comparing different features and specs:
| Model | ETP5 | ETP10 | ETP10 (4X3) | ETP30 | ETP50 | PT150E |
|---|---|---|---|---|---|---|
| Max Flow | 250 GPM
(15.8 L/s) | 310 GPM
(19.6 L/s) | 525 GPM
(33.2 L/s) | 820 GPM | 1,975 GPM
(125 L/s) | 396 GPM
(25 L/S) |
| Connections | 3″ x 3″ | 3″ x 3″ | 4″ x 3″ | 4″ x 4″ | 6″ x 6″ | 6″ |
| Max Head | 85 ft (26 m) | 165 ft (50 m) | 100 ft (30 m) | 120 ft (31 m) | 120 ft (6 m) | 66 ft (20 m) |
| Power Requirements | 230V/19.5A | 230V/40A | 230V/73A | 230V/73A | 230V/60A,
460V/11.8A | 480V/100A |
| Application | Water Transfer,
Bulk Dewatering | Flooded Suction,
Sand Filter Drawdown | Water Transfer,
Bulk Dewatering | Water Transfer,
Bulk Dewatering, Sewer Bypass | Water Transfer,
Bulk Dewatering, Sewer Bypass | Well-Point Dewatering |
| Download Equipment Specs | Download | Download | Download | Download | Download | Download |
ETP10
ETP30
ETP50
SUBMERSIBLE PUMPS
For pumping large volumes of water in sewer bypass, water transfer, bulk dewatering, or well-point dewatering applications.
Durable and compact. From our powerful sand and trash handling pumps to our efficient dewatering and residue/utility pumps, Stormtec can meet your applications. We offer the full range of Tsurumi pumps and products, as well as other great brands.
Our submersible pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering.
Every Submersible Pump we provide includes the following features:
- Rugged cast iron construction.
- Aluminum outlet camlocks.
- Corrosion resistant.
- Equipment can be stand alone or be used in combination with additional filtration equipment.
Available Submersible Pumps, comparing different features and specs:
* Full line of KTZ & LH Series pumps available; please contact us to discuss application-specific pump options.
| Model | SP2 | SP3 | SP3L | SP4-611* | SP6* |
|---|---|---|---|---|---|
| Max Flow | 80 GPM | 132 GPM
(8.4 L/s) | 210 GPM
(13.3L/s) | 640 GPM
(40.5L/s) | * |
| Connections | 2″ | 3″ | 3″ | 4″ | * |
| Max Head | 58 ft (17.5m) | 85 ft (25.75m) | 58 ft (17.5m) | 108 ft (32.7m) | * |
| Power Requirements | 110V/10.8A | 220V/12.2A | 220V/13A | 208V/40A,
575V/14.9A | * |
| Application | Water Transfer,
Dewatering | Water Transfer,
Dewatering | Water Transfer,
Dewatering | Water Transfer,
Dewatering, Sewer Bypass, Dewatering | Water Transfer,
Water Course Bypass, Dewatering |
| Download Equipment Specs | Download | Download | Download | Download | Download |
SP2
SP3
SP4-611*
EPDM HOSE & HDPE PIPING
For transporting large and small volumes of water in sewer bypass, water transfer, water treatment or dewatering applications.
Stormtec provides a wide range of hoses in EPDM (Ethylene Propylene Diene Monomer) rubber and HDPE (High Density Polyethylene) plastic, used for transferring large or small volumes of sewage, liquids, and sludge across a wide range of water management applications.
Stormtec has the experience and equipment needed for all HDPE Fusing requirements.
Every EPDM Hose and HDPE Piping we provide includes the following features:
- Leak testing between applications.
- Pressure testing prior to sensitive applications.
Available EPDM Hoses and HDPE Piping, comparing different features and specs:
| Categories | EPDM | HDPE |
|---|---|---|
| Diameter Range | From 2″ to 10″ Diameter | From 6″ to 24″ Diameter |
| Max Pressure | 50 psi | Varies (Depending on Size) |
| Lengths Range | From 5′ to 100′ Lengths | Fused to Fit |
| Download Equipment Specs | – | – |